INSTRUCTIONS.

1. Cut the tape to the length required plus 2cm for an overlap

2. Soak tape in tepid water and wring lightly to remove excess water

3. Pin up hem allowance. set iron to dry or 'wool' setting.

4. Place tape, with the white striped edges facing down over the hem, covering the raw edge. Press firmly, without moving the iron, for around 10 seconds until the tape sticks in place. Let the tape cool and check it has bonded. Repeat the process until the hem is complete.

TIP:

Use a press cloth over the tape and protect the fabric when pressing.

NB: Instant hemming tape is available in black, navy and grey.