Iron-On Mender Polycotton Patch 24x9cm 1 pc

USES:

For mending and decorating

• Table cloths

• Sheets

• T-shirts

• Curtains

• Pillows

• Applique shapes

(Not intended for use on plastic, nylon or rayon.)

INSTRUCTIONS:

1. Cut the patch to the desired shape or size. NB: It is a good idea to round corners of the patch before applying it — this decreases the chance of the corners lifting during wear and care.

2. Use a dry iron. set to cotton heat. If any risk of scorching garment, use a pressing cloth between the iron and the patch.

3. Iron area of garment to be mended, place patch glue side down.

4. Press down hard for 20-30 seconds without moving iron. Check bond and repeat if necessary. Continue in this manner until whole patch is bonded in place. Press along edges to finish seal.

5. Allow patch to cool before moving garment

TIPS:

• Garment must be laundered before mender is applied

• Cut loose threads from edges of torn area and turn garment inside out

• Apply mender to the inside of damaged garment

NB: Iron-On Mender available in 9 colours (white, black, brown, teal, grey, olive, light grey, navy and beige).